Furnace Repair

When your furnace breaks, get fast and reliable furnace repair from the experts at Heatwave Solutions. We provide emergency heating repair services to homeowners throughout Hurricane, UT, to restore warmth and safety.

Book Now Call Now
Schedule Now (435) 351-9585

Reliable Furnace Repair Service in Hurricane, UT

Losing your heat during a cold winter night is a serious problem that requires immediate professional help. Heatwave Solutions offers expert furnace repair to quickly diagnose and solve any heating system issue. Our certified technicians have the experience to repair all makes and models of furnaces. We arrive with fully stocked trucks, prepared to fix most problems in a single visit. An accurate diagnosis and a quality repair are crucial for your system’s long term reliability. We work efficiently to restore your home’s heat and ensure your system is operating safely. Your family’s comfort and safety are our highest priorities. Trust our team for honest, effective furnace repair when you need it most.

Book Now Call Now
Schedule Now (435) 351-9585
HVAC services
Years of experience
client satisfaction
completed hvac service calls

Feedback From Our Satisfied HVAC Customers

Homeowners across Hurricane, UT trust Heatwave Solutions for honest, reliable HVAC services. See how our AC and Heating team delivers quality work and dependable results every time.

Mackenzie B.
June 1, 2025

Highly recommend this company! Brennan was kind and professional.

Bill M.
April 22, 2025

They replaced our AC unit and explained every step of the process. The price was fair and the system works great.

Garret P.
February 3, 2025

Friendly and knowledgeable. They care about doing the job right and are respectful.

Brianna L.
August 14, 2024

Our AC went out during a heatwave and Heatwave Solutions came the same day! The technician was professional and was really quick. I will use them again.

Nelson R.
August 3, 2024

We called for an emergency repair at 10pm and this was the first company that picked up. Within two hours, our home was cool again. Can’t thank them enough.

Furnace Repair

A malfunctioning furnace in the middle of winter is more than just an inconvenience; it is a threat to your family’s comfort and safety. At Heatwave Solutions, we understand the urgency of a no heat situation. We specialize in providing prompt, reliable furnace repair services to get your heating system back up and running as quickly as possible. Our technicians are highly trained and equipped to handle a wide range of furnace problems, from simple fixes to complex repairs. We are committed to restoring warmth to your home with a focus on safety and quality workmanship. You can depend on us for transparent pricing and lasting repair solutions.

Our furnace repair service is designed to be fast and efficient from the moment you contact us. We prioritize repair calls and offer emergency service because we know you cannot wait for heat. A friendly and knowledgeable member of our team will take your call and dispatch a certified technician to your home promptly. Our technicians arrive in service vehicles that are stocked with a wide variety of common furnace parts. This preparation allows us to complete most repairs on the very first visit, saving you time and getting your heat back on faster. We are prepared for any challenge your furnace presents.

The first step our technician takes upon arrival is to perform a thorough diagnostic inspection of your furnace. We listen carefully as you describe the problem you are experiencing. Then, we use our expertise and specialized diagnostic tools to accurately identify the root cause of the failure. We do not just fix the symptom; we find the underlying issue to prevent recurring problems. This meticulous approach ensures that our repair is effective and durable. We check all aspects of your system, from the thermostat to the blower motor to the safety controls.

Once we have diagnosed the problem, we believe in complete transparency. Our technician will explain the issue to you in clear, understandable terms. We will show you the faulty part whenever possible and detail the necessary repair. Before any work begins, we will provide you with a clear, upfront, flat rate price for the repair. With Heatwave Solutions, you approve the price before the work starts, so there are never any hidden fees or surprise charges on your final bill. You will have all the information you need to make a confident decision about your home’s heating system.

Our skilled technicians are capable of repairing all types of furnaces, whether they are powered by natural gas, propane, or electricity. We can fix common issues like faulty ignitors, malfunctioning thermostats, or problems with the blower motor. We are also experts at addressing more complex safety issues, such as a malfunctioning limit switch or a problem with the gas valve. No matter the make or model of your furnace, our team has the knowledge and experience to repair it correctly and safely. We use only high quality, reliable replacement parts for all our repairs.

After you approve the repair, our technician will work diligently to fix your furnace. We respect your home and maintain a clean work area, using drop cloths to protect your floors. Our focus is on performing the repair safely and efficiently to restore your heat. Once the new part is installed, our job is not finished. We test the furnace thoroughly to ensure it is operating correctly and safely. We run the system through a full heating cycle to confirm that the repair has solved the problem and that your home is warming up as it should.

At Heatwave Solutions, we stand behind our work with a solid commitment to your satisfaction. We are a licensed, insured, and locally owned company dedicated to serving the Hurricane community with integrity. Our owner, Brennan DeMille, ensures that every member of our team is focused on providing the best possible customer experience. We strive to not only fix your furnace but also to provide you with peace of mind. When your furnace lets you down, count on the trusted professionals at Heatwave Solutions to make things right.

Book Now Call Now
Schedule Now (435) 351-9585

Emergency 24/7 Furnace Repair Near You

A furnace that quits in the middle of a freezing night is a true emergency. Heatwave Solutions offers 24/7 emergency furnace repair service to protect your family’s safety and comfort. Our on call technicians are ready to respond to your heating emergency day or night. We arrive quickly, prepared to diagnose the problem and perform a safe, effective repair. The care and attention to detail we provide ensures your heat is restored reliably. When you have a no heat emergency, your problem becomes our top priority.

Book Now Call Now
Schedule Now (435) 351-9585

Most Common Furnace Repair Questions

When your furnace stops working, it is stressful and you likely have many questions. Understanding the potential issues can help you communicate with your technician and make informed decisions. Here are some of the most common questions we get about furnace repairs.

A furnace that is blowing cold or cool air is a common and frustrating problem, but there can be several different causes. One of the first things to check is your thermostat. Make sure it is set to “HEAT” and not “COOL” or just “FAN”. If the “FAN” setting is on “ON” instead of “AUTO”, the blower will run continuously, even when the furnace is not in a heating cycle. This will circulate unheated air through your home, making it feel cool. Checking this simple setting can sometimes solve the problem instantly.

If the thermostat settings are correct, the issue could be an extinguished pilot light on an older furnace or a problem with the electronic ignition system on a newer one. The furnace’s burners are responsible for creating heat. If they fail to ignite for any reason, the furnace’s safety controls will prevent the gas valve from opening, but the blower may still turn on and circulate cold air. This is a safety feature to prevent unburned gas from filling your home. A faulty ignitor or a dirty flame sensor are common culprits that a technician can easily repair.

Another serious cause for a furnace blowing cold air is overheating. If the furnace gets too hot, a safety device called the high limit switch will trip. This shuts off the burners to prevent damage to the furnace and reduce fire risk. However, the blower fan will often continue to run to try to cool down the furnace. The most common cause of overheating is a severely clogged air filter that restricts airflow. This is why changing your filter regularly is so important. If the filter is clean, the problem could be a malfunctioning blower motor or a more serious issue that requires professional diagnosis.

If your furnace will not turn on at all, there are a few initial troubleshooting steps you can take before calling a professional. First, check the power to the furnace. Like any major appliance, a furnace needs electricity to operate. Look for the furnace’s dedicated circuit breaker in your home’s main electrical panel and ensure it has not been tripped. If it has, you can try resetting it once. There is also usually a power switch located on or near the furnace itself, which looks like a standard light switch; make sure this switch is in the “ON” position.

Next, check your thermostat. Make sure it has working batteries, if it uses them, and that it is set to “HEAT” with the temperature set several degrees higher than the current room temperature. A dead thermostat or incorrect settings will prevent the furnace from receiving the signal to turn on. You should also check the furnace’s main gas valve to ensure it is open, if you have a gas furnace. The valve handle should be parallel to the gas pipe to be in the open position.

If you have checked all these things and the furnace still will not start, it is time to call a professional from Heatwave Solutions. The problem could be a faulty transformer, a bad control board, a malfunctioning motor, or a tripped safety switch. These are not issues that a homeowner can or should try to fix themselves. Our trained technicians have the diagnostic tools and expertise to safely identify and repair the complex electrical and mechanical components inside your furnace.

If you have an older furnace, it likely uses a standing pilot light, which is a small flame that burns continuously to ignite the main burners when the thermostat calls for heat. If this pilot light goes out, your furnace will not be able to produce any heat. Sometimes, a strong draft can blow the pilot light out. Many older furnaces have instructions printed on a label inside the access panel for how to safely relight the pilot. This typically involves turning the gas valve to “PILOT”, holding down a button, and using a long lighter to ignite the flame.

However, if the pilot light will not stay lit after you release the button, or if it goes out repeatedly, it indicates an underlying problem. The most common cause is a dirty or faulty thermocouple. The thermocouple is a safety device that senses the heat from the pilot flame. If it does not sense heat, it shuts off the gas supply to prevent unburned gas from leaking out. Over time, the thermocouple can become coated with soot or simply fail. A technician can easily clean or replace this inexpensive part to solve the problem.

Another potential issue could be a problem with the gas valve or low gas pressure. It is important to remember that working with gas appliances carries inherent risks. If you are not completely comfortable and confident in relighting your pilot light, or if it will not stay lit, do not hesitate to call a professional. The team at Heatwave Solutions can safely diagnose the reason your pilot light is out and perform the necessary repair to get your furnace running reliably again.

Loud and unusual noises are your furnace’s way of telling you that something is wrong. The type of noise can often help diagnose the problem. A loud banging or popping sound, especially when the furnace first kicks on, is often caused by the sheet metal of your ductwork expanding rapidly as it heats up. However, it can also be a sign of delayed ignition, where gas builds up in the combustion chamber before it ignites, creating a small, contained explosion. This is a serious issue that needs immediate professional attention.

A high pitched squealing or screeching noise typically points to a problem with the blower motor. The noise could be caused by a worn out belt in an older belt driven furnace, or more commonly, by failing bearings in the motor itself. If you hear squealing, it is best to call for a repair quickly, as a motor that is allowed to seize up completely will be a more expensive repair. A technician can lubricate the motor or replace it if necessary.

Rattling noises can be caused by something as simple as a loose access panel, but they can also indicate a more serious problem like a cracked heat exchanger or a failing motor. A low humming or buzzing noise often suggests an electrical issue, such as a problem with the transformer or a capacitor. Because these noises can indicate a wide range of problems, from minor to severe, it is always best to have a trained professional from Heatwave Solutions inspect the system to determine the cause and ensure a safe repair.

The cost of a furnace repair can vary significantly based on the specific problem. The final price depends on the cost of the replacement part required and the amount of labor it takes to perform the repair. Simple and common repairs, such as replacing a flame sensor, an ignitor, or a thermostat, are generally on the lower end of the cost scale. These parts are relatively inexpensive, and a skilled technician can typically replace them in under an hour. At Heatwave Solutions, we always provide upfront, flat rate pricing, so you will know the exact cost before we start any work.

Mid range repairs might include replacing the furnace’s blower motor, the draft inducer motor, or the gas valve. These parts are more expensive, and the repair is more labor intensive, so the cost will be higher. The price will reflect the complexity of the job and the value of the components being replaced. Our technicians will always explain the repair that is needed and provide you with a clear, honest price, allowing you to make an informed decision without any pressure. We believe in transparency in all our pricing.

The most expensive furnace repairs involve major components like the control board or the heat exchanger. The control board is the electronic brain of the furnace, and it can be a costly part to replace. A cracked heat exchanger is a very serious safety hazard, and replacing it is a very labor intensive job. In cases of major repairs on older furnaces, the cost may be significant enough that it makes more financial sense to invest in a new, more efficient furnace. Our technicians will provide you with both the repair cost and a replacement option so you can choose what is best for your home.

Deciding between repairing and replacing your old furnace is a major decision for any homeowner. One of the primary factors to consider is the age of your furnace. Most furnaces have a typical lifespan of 15 to 20 years. If your furnace is approaching or has surpassed this age range, it may be nearing the end of its reliable life. Investing a significant amount of money in a major repair for an old unit may not be the most prudent long term decision, as other components are also likely to start failing soon.

The cost and frequency of repairs are also key indicators. Use the “5,000 rule” as a guideline: multiply the age of your furnace in years by the estimated repair cost. If the result is greater than $5,000, replacement is often the more sensible financial path. If your furnace has needed multiple repairs over the last couple of years, it is another strong sign that it is time to consider a replacement rather than continuing to sink money into an unreliable system. These recurring costs can quickly add up to a substantial portion of a new furnace’s price.

Finally, think about efficiency. A new high efficiency furnace can significantly lower your monthly heating bills compared to an older, less efficient model. The energy savings from a new unit can help offset the initial purchase price over time. A new furnace also comes with a full manufacturer’s warranty, protecting you from repair costs for many years. Our team at Heatwave Solutions will give you an honest assessment of your current furnace’s condition and provide you with clear pricing for both the repair and replacement options, empowering you to make the best choice for your situation.

We don’t only offer Furnace Repair. Heatwave Solutions Heating and Cooling offers a comprehensive menu of professional HVAC services to cover all of your home comfort needs. Our expert team is equipped to handle jobs of any size, from minor repairs to complete system installations, with a focus on quality, efficiency, and customer satisfaction.

Our primary services include:

Our certified technicians have the expertise to work on all makes and models, delivering superior workmanship for every job. Whether you need an emergency repair, a brand new high efficiency system installed, or routine maintenance to keep your equipment in peak condition, we are your single, trusted provider. We are committed to ensuring your home in the Hurricane, UT, area is comfortable, safe, and efficient throughout every season. Trust the experts at Heatwave Solutions for all your heating and cooling needs.

Heatwave Solutions Heating and Cooling is proud to be a local company dedicated to serving our friends and neighbors throughout Washington County and the surrounding region. Although we are headquartered in Hurricane, UT, we deliver our full range of expert heating, cooling, and air quality services to a wide area.

Our primary service areas include:

Our team is committed to providing prompt, reliable, and high-quality HVAC service to every community we reach. We strive to be the trusted local contractor for homeowners throughout the greater St. George area. If you live near one of these locations but do not see your specific town listed, please do not hesitate to contact us. We are always looking to help our neighbors and may be able to extend our services to your home.

Easy, Free Furnace Repair Estimates

Don’t be left in the cold. Contact Heatwave Solutions now for a fast, reliable estimate on your emergency furnace repair.

Book Now Call Now
Schedule Now (435) 351-9585